Valve Gated Titanium Zirconium Molybdenum Hot Runner (TZM)
Valve gated titanium zirconium molybdenum hot runner means hot runner has actuator to control needle valve. Valve gated titanium zirconium molybdenum (TZM) hot runner compare to other hat runner not only it has complicated structure but it also has more than a set of needle valve actuator to control needle valve open and close movement which using valve actuator control the needle valve to open and close the sprue by mechanical motion at the hour arranged. The actuator is similar to hydrocylinder which is using the hydraulic equipment of injection molding machine to connect with mould to become oil hydraulic circuit. So that it can realize open and close movement of needle valve and to control molten plastic pouring into cavity.
Valve gated TZM hot runner is machinery closed by valve actuator so it not limited by the time of plastic cooling time in the sprue which can great save product‘s molding cycle. Besides, valve gated TZM hot runner also has a lots of advantages which hot-tip and sprue gating hot runner system cannot comparison such as controlling switch time of sprue, smooth and flat sprue and widely enlarge hot runner application.
If you have any other question or inquiry of TZM alloy products, please feel free to contact us through the following methods:
Email: email@example.com firstname.lastname@example.org
Tel.: +86 592 5129696/86 592 5129595
Fax: +86 592 5129797